| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Metabo 3" Random Orbital Sander ? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5263 |
Page 1 of 1 |
| Author: | Brook Moore [ Thu Feb 23, 2006 3:44 am ] |
| Post subject: | |
Does anyone have experience with the Metabo SXE400 3" Sander? Wondering about its usefulness in sanding into the waist using its intermediate pad. Thanks, Brook |
|
| Author: | Brook Moore [ Fri Feb 24, 2006 2:16 pm ] |
| Post subject: | |
Hmmm - the silence is speaking loudly. Maybe I will see if I can get any feedback from one of the general woodworking forums. |
|
| Author: | npalen [ Sat Feb 25, 2006 3:51 am ] |
| Post subject: | |
Brook I have one and find it useful in a number of tight locations. The variable speed is nice also. I have trouble finding a source for replacement discs. It's actually 80MM but I did find some 3" diameter discs and machined the pad down to match them. Nelson |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|